SMT MACHINE ET-UL390 loader machine
SPECIFICATION
Item:ET-UL390 loader machine
Dimension:L2200*W920*H1200mm
Frame:Special aluminum profile guide rail and special thousand bird type plastic chain
Lift:120W Taiwan brake motor drive uses ball screw to make Magazine stepping up and down
Structure:Pneumatic clamp structure
0.9M long push plate Conveyor:1 set
Maximum size of PCB:L530*W390
Turnover box specifications:(L)535*(W)460*(H)565mm
Direction:Left to right / right to left
Lift platform pitch selection:10,20,30,40
Closing function:Automatic
Operation control panel:Display control true color touch screen
power supply:220V 50HZ
No. of Full load storage board:50 pcs
Automatic trigger features:
1.microcomputer control, stable and reliable work
2.Fuji Button or touch screen two control panels to choose, man-machine dialogue is convenient
3.a number of sound and light alarm functions
4.can use the standard material box, strong versatility, can place three material shelves
5.according to the PCB thickness, can set the material shelves up and down step
6.material machine built-in push plate mechanism
7.with automatic counting function,convenient for production statistics, with signal communication structure, can be connected with other machines on-line
Safe Operation Requirements:
1. Boot, please pay attention to work music, air pressure is correct.
- during white-light operation, do not press the emergency button unless the button is pressed in an emergency.
- it is prohibited for a staff member to be attached to a machine frequently or on a machine.
- lifting trolley, do not put your hand around the frame
- attention to adjust the plate spacing on the rack, wide easy to lead to fall off the board, tight easy to lead to card board
Pre-boot:
1. power on. Air Source. Turn on the power switch.
2. 1,2adjust the grade of the track, so that it is consistent with the grade of the PCR plate. Three send board step number area Out Board Point buy set
3. step set: press the button to select Pitch 12342.
4.out board adjustment:
4.1manually adjust the push rod in the middle of the PCB to be produced.
4.2make sure the machine can send the board smoothly 4.3press the White Key
4.4press the return key
|
|
SMT MACHINE single rail loader machine Images
|
